> For the complete documentation index, see [llms.txt](https://bloxxa-1.gitbook.io/bloxxa-guide/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://bloxxa-1.gitbook.io/bloxxa-guide/getting-started/how-to-display-test-networks-in-metamask.md).

# How to Display Test Networks in MetaMask

**MetaMask allows you to use both the main network and test networks. It includes popular test networks and also lets you set up and configure custom test networks used in your projects.**

**Here’s how to display test networks in MetaMask:**

**Here’s how to install MetaMask:**\
  1\.  Click the "Networks" button at the top of the homepage (usually, the default is "Ethereum Mainnet").\
  2\.   Click the "Show/Hide Test Networks" link to go to the settings page.

<figure><img src="/files/FsNX5dmt3rxKvDv9oiOA" alt=""><figcaption></figcaption></figure>

3. Toggle the switch under "Show Test Networks" to enable it.

&#x20;4\.  Click the MetaMask icon to return to the homepage, then click the "Networks" button again.<br>

<figure><img src="/files/XKULFJMY1Whuuo3yiRLK" alt=""><figcaption></figcaption></figure>

5. Select "Goerli" as the network.
6. Click on the highlighted account to copy its address.

<figure><img src="/files/m32PfaeKw1M32Ic7Y37N" alt=""><figcaption></figcaption></figure>

**Note**: If you don’t see the network you need in the list and want to add it to MetaMask, simply click the "Networks" button, add the network, enter the necessary information, and click "Save."\
\
\
\
\ <br>